This rectangular, Z-axis LRA can be used for many of haptic feedback applications. It has solderable contact pads on the top and bottom of the FPC which allowing it to be connected directly to a PCB using a "hot bar soldering" machine. Like all LRA's this device is typically connected to a LRA driver IC which produces the AC drive signal for this device. For further information about this see the BOTTOM of this page. For orders of 1K pcs+, it can be ordered with or without tape / foam. Custom FPC's are available as well.
| Summary Of Specifications | |
| Length (mm): | 12.0 |
| Width (mm): | 4.0 |
| Height (mm): | 3.5 |
| Rated Voltage (AC RMS): | 1.8 |
| Operating Voltage (AC RMS): | 0.1 ~ 1.85 |
| Rated Current MAX (mA): | 60 |
| Typical Current (mA): | 47 |
| Rise Time (ms) MAX *: | 40 |
| Fall Time (ms) MAX *: | 60 |
| Resonant Frequency: | 240 |
| Vibration Force (Grms): | 1.60 |
| * at 50% of Maximum G force | |
| Packaging Spec | |
| Part Packaging: | Tray |
| Qty per reel / tray: | 100 |
| Quantity - Master box: | 4000 |
| Size - Master Box: | Call us |
| Weight - Master Box: | Call us |
| ECCN: | EAR99 |
| USA HTS TARIFF: | 8501.10.4020 |
| 25% Exclusion Code: | 9903.88.69 |
| 25% Ex. Code Valid: | from June 15, 2024 thru May 31, 2025 |
|
If you need samples, please Contact Us. |
|||
|
This part is not authorized for Life Supporting Devices
None of the products offered for sale by us are authorized for use in any device that:
