This coin vibration motor has an FPC with large contact pads that typically connect with PCBA mounted pogo pins / spring contacts on the PCBA. The coin vibrator motor is mounted against the inner wall of the product housing. The rear of this motor has 3M 467 double stick tape to facilitate mounting. If you need wire leads, you can solder wires to these contact pads, however the wire must be thin and flexible (UL3302 AWG 32 /34) else the adhesive holding the FPC to the metal base may separate and the FPC lift upward. If the FPC size or contact arrangement is not suitable for your application we can fabricate a custom flexible circuit as per your design. Tooling fees may apply.
CLICK HERE to see photos of how coin motors have been mounted in products.
| Summary Of Specifications | |
| Technology Type: | BRUSH |
| Diameter (mm): | 8.0 |
| Thickness (mm): | 3.0 |
| Rated Voltage (Vdc): | 3.0 |
| Operating Voltage (Vdc): | 2.5~3.5 |
| Rated Current MAX (mA): | 85 |
| Typical Current (mA): | 50 |
| Rise Time (ms) MAX *: | 90 |
| Fall Time (ms) MAX *: | 50 |
| Rated Speed (rpm): | 10000 MIN |
| Vibration Force (Grms): | 0.80 |
| * at 50% of Maximum G force | |
| Packaging Spec | |
| Part Packaging: | Plastic Tray |
| Qty per reel / tray: | 100 |
| Quantity - Master box: | 4000 |
| Size - Master Box: | 45*28*19CM |
| Weight - Master Box: | 5.8KG |
| ECCN: | EAR99 |
| USA HTS TARIFF: | 8501.10.4060 |
| 25% Exclusion Code: | 9903.88.67 |
| 25% Ex. Code Valid: | thru May 31 2024 |
|
If you need samples, please Contact Us. |
|||
|
This part is not authorized for Life Supporting Devices
None of the products offered for sale by us are authorized for use in any device that:
